Log Cabin V3

I thought it was time to revisit the Log Cabin design. I’ve made a few little improvements and design changes. These have a thicker base and roof and more internal volume.   Specs: Timber: Cypress Timber Thickness: 35mm Design: Log Cabin – OATH Dimensions 280 x 200mm Internal Volume:  TBA …

Click to see more

Budding Box – Kit

This box design is intended for Budding – Soft Splits, Observation and normal splits. It also has a honey super section. Specs: Timber: Cypress (with Pine lid) Timber Thickness: 35mm Design: Utility – Combination: Budding / Observation / Splitting Internal Volume: 6.8 litres Brood Supports: 10mmm Cypress cross bars Separator Plate: …

Click to see more

Rebated Cypress OATH

Specs: Timber: Cypress Timber Thickness: 35mm Design: Rebated OATH with Super – 280mm x 200mm. Galvanised screws fitted internally so they are not seen from the outside. Internal Volume: 6.8 litres Brood Supports: Cypress Separator Plate: Clear Acrylic Coating: Oil Rebated joints – adds some extra strength to box construction. …

Click to see more

Log Cabins V2

***Construction in progress… I’ve started on some new Log Cabin Bee Hives. These have more layers than the previous ones Using cypress at 35mm x 30mm. Putting the individual frames together… Below, all the individual frames are glued and each frame will need round edges routed out before the frames are …

Click to see more

Red Mailbox Hive

I thought it might be interesting to make a box in the shape of an old red mailbox… Specs: Timber: Cypress Timber Thickness: 35mm Design: OATH with Super – 280mm x 200mm Internal Volume: 6 litres Brood Supports: Cypress Separator Plate: Clear Acrylic Below, all the pieces needed for the boxes… …

Click to see more